Pneumatic Dispenser Extreme Systems Technology Phils Inc Back

QUICK 982B Dispensing Controller

Feature:
*The Automatic Liquid Dispenser with time control, to push the liquid pneumatically, controlled by timer, to be sure the same dispensing drops and dispensing cycle time.
*Regulate the air pressure with suitable tip at your equipments of the different liquids as glues, greases, solder pastes.
*Applied for 10 types of steel tips and 5 types of plastic tips
for various customers’ needs.
QUICK 982 982A Dispensing Controller
Feature:
* Timer of Each injection controlled by a timer to feed gel at given time and in given quantity so as to ensure a quantized injection dosage.
* Injection dosage and time can be changed each time by adjusting air pressure, choosing an appropriate time and needle to suit different needs.
* Liquid or thick liquid that can be injected include: red gel, yellow gel, epoxy resin, tin solution, silica gel ,soldering fluid and etc.
* Mini-pedal controller
* Plastic nozzles of various sizes to suit different needs.

 Model

982A

982

 Timing

0.01-0.26S programable

0.01-1S;1-10S;2-20S;3-30S programable

 Repeat Ability

±0.5%

±0.5%

 Min Injection Dosage

0.01mL

0.01mL

 Input Air Pressure

2.5-7bar(35-100psi)

2.5-7bar(35-100psi)

 Output Air Pressure

0.7-7bar(1-100psi)

0.7-7bar(1-100psi)

 Input Voltage

220V/110V AC

220V/110V AC

 Dimension

238 X 150 X 60 mm

238 X 150 X 60 mm

 Weight

1.7kg

1.7kg

Ways of dispensing

Automatic,manual,etc with a total of 16 kinds,free setup

 Dispensing time

0.01-99.99s adjustable

 Timing intervals

0.1-9.9s adjustable

 Repeat tolerance

+/- 0.5%

 Size

23.8cm*15.0cm*6.0cm

 Weight

1.7Kg

 Internal voltage

24VDC

 Min deposit size

0.01ml

 Air Input

35-100Psi(0.25-0.7Mpa)

 Air output

1-100Psi(0.01-0.7Mpa)

 

 

 

 

 

Home